1.首先要檢查施工現場的電源情況，使其能夠滿足栓釘的焊接要求。

　　Firstly, it is necessary to check the power supply at the construction site to ensure that it meets the welding requirements of the bolts.

　　2.施工現場的焊接參數要嚴格按有關規范明確，圖紙上的焊接參數是施工現場的焊接參數指標。

　　2. The welding parameters on the construction site must be strictly defined in accordance with relevant specifications, and the welding parameters on the drawings are the welding parameter indicators of the construction site.

　　3.根椐圖紙，在鋼梁上進行栓釘的定位后再進行栓釘焊接，不得一邊定位一邊焊接。

　　3. According to the drawings, position the bolts on the steel beam before welding them, and do not weld while positioning.

　　4.栓釘在焊接后的檢驗，焊接處的焊肉成型飽滿，焊角尺寸要滿足要求，在主要構件上逐批的進行1%抽樣打彎檢驗，若焊釘的根部無裂紋，則可認定其通過彎曲檢驗

　　4. After welding, the inspection of the stud should ensure that the weld meat at the welding point is fully formed and the welding angle size meets the requirements. A 1% sampling bending inspection should be carried out on each batch of the main components. If there are no cracks at the root of the stud, it can be considered as passing the bending inspection

　　本文由濟南樓承板友情奉獻.更多有關的知識請點擊:http://www.cq4du.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Lou Cheng Ban For more information, please click: http://www.cq4du.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.